+213 (0) 34 12 06 70 info@upi-gr.com

Sterile filter (P)-SRF

P-SRF

The ultrafilter P-SRF and SRF sterile filter is a wound depth filter made from a borosilicate glass fiber filter medium. The inner and outer support jacket and the end caps are made of stainless steel.
The separation rate is 99.99998% based on 0.01 µm. The three-dimensional depth medium has a void volume of 99%. This guarantees a high dirt holding capacity with low differential pressure and a high flow rate.

Depth filters are recommended as sterile filters for the food industry, they are typically installed locally, the closer to the point of use, the better. We recommend prior central compressed air treatment using particle and activated carbon filters and adsorption drying.

These filter elements can be sterilized. Sterilization can be done either in-line with steam or in an autoclave. To ensure the steam quality for sterilization, we recommend our steam filter P-GS. If possible, sterilization should be carried out after each production batch.
The sterilization temperatures vary depending on the duration between 110 ° and 140 ° degrees.

Filter housing P-EG for P-SRF

The stainless steel housings P-EG are available to match the sterile filters. The series consists of 12 single housings (1 filter element) and 6 multi-housings (3 – 10 filter elements).
Both housing variants are available in 1.4301 (V2A) and 1.4404 (V4A) stainless steel.

All housings have the UF plug connections for the ultrafilter filter elements.

Design, testing, and manufacturing according to AD2000.
The housing is classified and approved in accordance with PED 97/23 / EG for fluids in fluids group 2.

Filter housing P-EG for P-SRF-N

The stainless steel housings P-SRF-N are available to match the sterile filters. The series consists of 12 single housings (1 filter element) and 6 multi-housings (3 – 10 filter elements).
Both housing variants are available in 1.4301 (V2A) and 1.4404 (V4A) stainless steel.

These housings are fitted with the P-SRF-CU filter element

All housings have the UF plug connections for the ultrafilter filter elements.

Design, testing, and manufacturing according to AD2000.
The housing is classified and approved in accordance with PED 97/23 / EG for fluids in fluids group 2.

Prices for the 1.4404 (V4A) stainless steel version are available on request.

RS 18.5